Product description
The charging cable is only suitable for watches with a charging spacing of 2.84MM (0.11IN).
Therefore, to make sure the charging cable can fit your watch, please follow the steps below to measure the charging spacing of your watch using the USB-A (Type A) plug and USB-C (Type C) plug.
If it is the same as the picture, it will fit; if not, it will not fit.
Many charging cables that resemble this one, but they are not the same charge spacing (our charge cable spacing is 2.84mm), make sure you check the charge spacing of your watch to avoid incompatible.
Can use the USB A plug to judge the spacing of the charging ports
The relationship between the charging cable and the USB A plug is shown in the image.
You can test your charging cable with the USB A plug .
You can also test the charging port on the back of your watch.
Can use the USB C plug to judge the spacing of the charging ports
The relationship between the charging cable and the USB C plug is shown in the image.
You can test your charging cable with the USB C plug.
You can also test the charging port on the back of your watch.
Using a USB-A (Type A) plug to measure the charging spacing of your watch.If it is about the same as the picture, it will be fit; Otherwise, it will not be fit.
Step 1
The long side of the USB-A will be about the same length as the watch’s charging port.
Step 2
The short side of the USB-A will be about the same length as the spacing between the watch’s charging contacts.
It is recommended to use a ruler for measurement, as it will be more accurate.
The following are suitable models (Please pay attention to the specific model)
WYZE Wyze 44mm、Wyze 47mm Willful SW021、SW023、SW025、ID205L、ID205S、ID216 Smart Watch Letsfit ID205L、ID205S、ID206、EW1、IW1、IW2 Smart watch YAMAY ID205L、ID205S、ID205U、SW021、SW023、SW025、ID206、ID216 Smart Watch Letscom ID205L、ID205S、ID205U、ID205G、ID206、ID216、GT01 Smart Watch UMIDIGI Uwatch 3S、Uwatch3、Uwatch3 GPS、Uwatch 2S、Uwatch2、UFit、Urun、Urun S Smart Watch Fitpolo IDW13、ID205L、ID205S、ID205G、GT01 Smart Watch VeryFitPro ID205L、ID205S、ID205G、ID205U、ID206、GT01 Smart Watch Lintelek ID205S、ID205L Smart Watch Dirrelo GT01、ID206 Smart Watch LIFEBEE GT01 Smart Watch SKG V7、V7 Pro、V7 Cyber、R8 Smart Watch (not for V7-2) Cubitt CT4 Smart Watch (not for other Cubitt watch) 3Plus Vibe 3Plus Vibe Pro、Vibe Lite Watch T42 series KASEEMI T42、ANDFZ T42、OUFUNI T42、Bakeey T42、 TBITD T42 Watch IDW13 series TOOBUR IDW13、VRPEFIT IDW13、TEMINICE IDW13、 Konitee IDW13、Faweio IDW13、Amzhero IDW13 watch
The following models are not suitable, please do not purchase !
First letter of the word Watch brand / model A AcclaFit 、Aeac 、AGPTEK LW11 、AGPTEK LW31 、AZTTKIA B、C Blackview 、BIGGERFIVE 、Bowost 、Cloudpoem D、E、F、G Dafit 、Donerton 、EIGIIS 、Fitonme 、FMK 、GloryFit 、GRV H、I HAVAFIT 、Harry Lime 、IMILAB KW66 、IMFRCHCS K KALINCO 、Kuizil 、Keep B3 、Knauermann Pro 3 L、M LIGE 、Lotus 、Mgaolo Kids 、MOLOCY 、Motast 、Muzaria N、O、P Nerunsa 、Ordtop 、Popglory R Reflex active 、RIVERSONG 、Radley 、RT LS05S/RT2(LS10) / RS4(LS12) 、RKINC S SoundPEATS 、Stiive T Tensky 、Togala 、Ticwatch GTX/CXB01 、TickTalk 、Tisoutec X Xiaomi Haylou RT LSO5S 、Xiaomi Haylou RT LS05 、Xiaomi Haylou Solar LS05 Y、Z Yowow BIT 、YAMAY SW022 、ZOSKVEE
Tips to help you protect your smart watch better:
*Charging your watch before the battery runs down.
*We suggest to use computer, laptop or power bank or use 5V/1A adapter to charge (*Do Not use quick charger to charge which voltage/current over 5V 1A )
Please note: To ensure that the charging cable can charge your watch,we will send you two charging cables [one black (S-+N) and one white (S+- N)] with opposite polarity.Only one charger is compatible.If the black charging cable does not support your watch,please try a white charging cable.
Attention: OnIy suitable for spacing of 0.11in(2.84MM).Not for 0.16in(4MM) or others.Can use the plug of USB-A(Type-A) to measure the spacing(Refer to picture 2).Step 1：Compare the USB-A plug’s long side with the watch’s charging port.Step 2：Compare the plug’s short side (part) with the watch’s charging center point.If same as the picture,it fits；if not same, it not fits.Please refer to the other pictures to check the compatible model of the watch.
The following watches are not compatible, do not buy them:AcclaFit、Aeac、AGPTEK LW11、AGPTEK LW31、AZTTKIA、Blackview、BIGGERFIVE etc.(For more incompatible models, please refer to the Product Description)
Fast Charging Speed:Design to charge your smartwatch as fast as an original charger cable.Do not worry this replacement charging cable is wasting precious time.
Enhanced Durability:With 6000+ bend lifespan and reinforced cable joint, this charger is more than ready to handle the stresses and strains of daily use.
Safety & Reliability:Charging Cord includes built-in over-current, over-voltage, short-circuit and over-temperature protection.Premium Quality Copper Wire and Pin Gold-Plated ensure charging safety and reliability.
What You Get: 3.3Ft replacement smart watch charger cable [ one black (S – + N) and one white (S + – N) ], our 12-month guarantee, and 24-hour friendly customer service.
Juan –
Good priced,great chargers.
The charging cable works better than the original,it is longer,so it makes it easier to charge,the package comes with 2 dufferent chargers,only one will fit the watch,the seller does that bc if one won t fit your watch the other will,some use the white,mine uses the black,the price is is a good price,good charger,I bought two AND I bought 2 before,so I am a repeat customer,good stuff
Mitch K –
Quality Cable at a Great Price
So far, I am very happy with this charging cable. It works perfectly! The original cable that came with my Smartwatch was extremely flimsy and very short. This new cable is 3 feet long so it makes it easy to charge almost anywhere. I appreciate that 2 different cables are sent. It takes the guesswork out of which cable to order. In my case, the White cable worked with my watch. You can’t beat the price. Just be sure to measure the pin and magnet locations as stated in the description/photos to verify it will fit your watch. My watch charges at the same speed as the original cable. There are many reviews complaining that only 1 cable works. That is by design. You are not purchasing 2 exact cables. They send you the 2 different cables that have different polarity with the intent that only 1 will work.
Mam –
Burns beware
Purchased to use as a charger for my Wyze47 watch.I plugged this charger the sane as my original charger. The watch face did not light up to indicate charging. The watch face remained black. Rechecked to ensure proper contacts. Left it in a few minutes. Came back to check phone. Watch face still black. I picked up the watch to take off the charger. Both my watch and the charger were extremely hot to the touch!. I immediately detached the charger from the watch and the usb power strip. I left both aside to vool fown hoping my watch was not ruined.The power strip is ok.I found my original charger for the Wyze watch. The watch had cooled to the touch. I attached the original charger to my watch- *Bingo!* Watch is is charging.So the problem is this set of chargers. Bummed! $$’s
Abraham Aaron Barahona –
Reliable Multi-Brand Smartwatch Charger
The Sinoacc Smart Watch Charger is a convenient and reliable charger that works well with a variety of smartwatch brands like SKG, Letsfit, Cubitt, Yamay, and more. The magnetic connection is strong, ensuring the watch stays securely in place while charging. It charges efficiently without overheating, and the compact design makes it easy to carry around or use at home. If you own multiple smartwatches or need a versatile charger, this is a great affordable option.
Irish –
Worked well first try
Works well thank u
Larry from NJ –
good
good
Doris –
even if your watch is not listed as a match give it a try
I was very pleased with this item, even though my watch was not listed as a match because of the cheap price I decided to try it, and I certainly was glad that I did. It works perfectly with my watch.
Disappointed –
May not work
Received 2 but only one worked.
عمرو فرج –
المنتج غير مطابق للساعه
Francisco José –
Pues igual a otro que compré también. Sirve para esos relojes típicos que son iguales pero que tienen varias marcas. Hay que tener cuidado con la polaridad porque varía de unos a otros, pero eso viene puesto en las imágenes de la página del producto. Por lo demás un cable típico de carga que hace su trabajo.
Isma Miranda –
Muy bien, funciona correctamente
Wolter –
Ich habe dieses Ladegerät als Ersatz für meine Smartwatch (Fitpolo Uwatch 3) bestellt und bin wirklich zufrieden. Die Kompatibilität ist wie angegeben – das Kabel wurde sofort erkannt und lädt zuverlässig.Das magnetische Andocken funktioniert problemlos: Der Kontakt sitzt fest, ohne zu verrutschen, und die Uhr beginnt direkt mit dem Ladevorgang. Besonders gefällt mir, dass das Kabel 1 Meter lang ist – nicht zu kurz, nicht zu lang – genau richtig für den Nachttisch oder Schreibtisch.Die Verarbeitung wirkt hochwertig, der Stecker sitzt stabil im USB-Port und das Kabel macht insgesamt einen langlebigen Eindruck. Preis-Leistung ist hier top!Fazit: Perfekter Ersatz oder Zweitkabel fürs Büro oder Reisen. Klare Kaufempfehlung für alle, die eine kompatible Smartwatch besitzen.
Kim Johansson –
Works perfectly. Includes two cords that have reverse polarity on the magnets/connection so if it doesnt work with one it should work with the other. Seemed like a waste to me so for the cord that didnt work with my Blackview w60 i simply pulled out the magnets, reversed them and glued them back in with some superglue. Now I have two chargers that works:- Mark the side that is up on each of the magnets with a sharpie or such.- Get a pair of pliers and pinch the plastic around each magnet so that the glue lets go.- Use the magnet on the other charger to lift out the magnets or gently pry them out with a small flathead screwdriver- Put a drop of superglue in each hole. Use the pliers to re-seat the magnets, marked side down.It does not matter if the plastic gets slightly deformed. It can be molded back using heat or tidied up lace using and a nail file or exacto knife. Be careful not to damage the connectors